Cable & Wire Harness Protection

• Self-closing Sleeves are used to wrap wire harnesses that already have connectors installed. The open structure supports post-installation and maintenance. After wrapping, the sleeve keeps the harness bundled and tidy while reducing friction with metal edges, equipment housings, or moving parts.
• Cable Protection Webbings are used in industrial equipment, electrical systems, control cabinets, vehicle harnesses, and internal machine routing positions, with focus on abrasion protection, tensile resistance, bending stability, cutting length, and covering consistency.
• Wire Harness Protection Sleeve is used for bundled protection of multi-core harnesses, sensor harnesses, power harnesses, and signal harnesses, reducing loose wires, cross-friction, and post-assembly looseness.
• Special Performance Webbing is used for cable protection projects requiring heat resistance, flame retardancy, abrasion resistance, oil resistance, or special surface treatment. It is suitable for equipment interiors, vehicle interiors, and high-frequency maintenance positions.

This application covers Self-closing Sleeves, Cable Protection Webbings, Cable Protection Sleeve, Wire Protection Sleeve, Cable Bundling Sleeve, and Self Closing Cable Sleeve. Project development is defined around harness outer diameter, coverage width, opening rebound, cutting length, color, abrasion-resistance grade, heat-resistance requirement, flame-retardant requirement, roll packing method, and packaging label.

Regular wire harness sleeves are mainly black, with gray, orange, and project-specified colors also available. Automotive harness projects focus on wrapping tightness, abrasion resistance, and bending performance. Industrial cable projects focus on abrasion resistance, cutting length, roll stability, installation efficiency, and on-site maintenance convenience.

Samples for regular Self-closing Sleeves and Cable Protection Webbings are produced within 7–10 working days. Samples for wire harness protection projects involving flame retardancy, heat resistance, special coating, or special structure are produced within 10–15 working days. Bulk production is generally scheduled within 3–5 weeks. Regular widths and colors start from 1000 meters/specification/color, while special-performance structures and multi-color projects start from 2000–3000 meters/specification/color.

Bulk shipment supports roll packing, fixed-length cutting, cartons, pallets, project labels, outer-carton shipping marks, and installation-batch differentiation. For wire harness protection products used on assembly lines, roll direction, cutting length, tolerance, packing sequence, and on-site pick-up method are confirmed at the same time.

Production and pre-shipment inspection for Cable & Wire Harness Protection products are carried out around harness outer-diameter fit, coverage width, opening rebound, cutting length, abrasion resistance, heat resistance, flame-retardant requirements, color consistency, edge condition, surface defects, roll tension, labels, and outer-carton condition.

Self-closing Sleeves focus on self-closing performance, rebound stability, opening overlap, clean cut edges, and tightness after wrapping. Cable Protection Webbings focus on width, thickness, abrasion resistance, surface condition after bending, and batch consistency. Industrial cable projects also check roll length, fixed-length cutting, and on-site installation direction.

Before shipment, approved samples, technical specifications, target-market material requirements, harness dimensions, roll packing method, and packaging labels are checked. Inspection results are used for consistency control of material, dimensions, covering, roll preparation, and packaging.